KARAKTERISTIK PAPAN PARTIKEL DARI CAMPURAN LIMBAH AKASIA (Acacia mangium Willd.) DAN KULIT KELAPA MUDA  (Cocos nucifera L.): Characteristics of Particle Board from Mixed Waste of Acacia (Acacia mangium Willd.)  and Coconut Shell (Cocos nucifera L.

Riana Anggraini; Jauhar Khabibi; Yunia Frida Adelka

doi:10.22437/jsilvtrop.v5i1.12170

Authors

Riana Anggraini Universitas Jambi
Jauhar Khabibi Universitas Jambi
Yunia Frida Adelka Universitas Jambi

DOI:

https://doi.org/10.22437/jsilvtrop.v5i1.12170

Keywords:

Acacia mangium WIlld., Cocos nucifera L., Particleboard, Waste

Abstract

The aim of this research is to make an effort to utilize forestry waste, in the form of harvesting waste of acacia (Acacia mangiumWilld.) and coconut shells (Cocos nucifera L.) into particle boards by considering the evaluation of the value of particle board characteristics, both physical and mechanical characteristics in accordance with standards JIS A 5908-2003.This study used a factorial analysis where the first factor was the composition of the raw material for acacia: coconut (100: 0, 60:40, 50:50, 40:60 and 0:100). While the second factor is the provision of pretreatment on particles (cold soak, hot soak and without immersion).This analysis was carried out in a completely randomized design (CRD) with three repetitions.The results showed that the composition of the raw materials had a significant effect on the value of water content, water absorption, modulus of rupture and modulus of elasticity.The pretreatment had a significant effect on the thickness swelling, water absorption, modulus of rupture and modulus of elasticity. Meanwhile, the interaction of these two factors has a significant effect on the internal bond value, modulus of rupture and modulus of elasticity.Based on the results, it is known that only the density parameters that meet the JIS A 5908-2003 standard, the moisture content and thickness development parameters have not met the standards, while the mechanical characteristics of the particle board have not met the standards.Overall particle board with the composition of acacia raw material: young coconut 60:40 and heat soaking pre-treatment can produce good quality particle board.

Downloads

Download data is not yet available.

References

Alghiffari AF. 2008. Pengaruh kadar resin perekat urea formaldehida terhadap sifat-sifat papan partikel dari ampas tebu. Skripsi. Institut Pertanian Bogor, Bogor, Indonesia.

Amelia S. 2009. Pengaruh perendaman panas dan dingin sabut kelapa terhadap kualitas papan partikel yang dihasilkannya.Skripsi. Fakultas Kehutanan, Institut Pertanian Bogor, Bogor, Indonesia.

Ariyani MS. 2009. Kualitas papan partikel dari sabut kelapa (Cocos nucifera L.). Skripsi.Fakultas Kehutanan,Institut Pertanian Bogor, Bogor, Indonesia.

Bowyer JL, Shumlsky R, Haygreen JG. 2003. Forest Products and Wood Science AN Introduction 4th Ed. USA : Lowa State Press A Blacwell Publ.

Haygreen JG dan Bowyer JL. 1993. Hasil Hutan dan Ilmu Kayu. Gajah Mada University Press. Yogyakarta.

Iswanto AH, Coto Z dan Effendi K. 2007. Pengaruh perendaman partikel terhadap sifat fisis dan mekanis papan partikel dari ampas tebu (Saccharum officinarum). Jurnal Perennial. 4(1): 6-9.

Jamaluddin. 2018. Kualitas papan partikel dari campuran batang sorgum (Sorghum bicolor L.) dan kayu akasia (Acacia mangium W.) berdasarkan konsentrasi perekat urea formaldehida. Jurnal Hutan Lestari. Vol. 6 (3): 486â€“498.

Japanese Standard Association. 2003. Japanese Industrial Standard Particleboard- JIS A 5908. Japanese Standard Association, Japan.

Maloney T. 1993. Modern Particleboard and Dry Process Fibeboard Manufacturing.MILLER Freeman Inc, San Fransisco, USA.

Muhammad S, Marwanto, Muhammad M dan Maulana S. 2019. Sifat fisis dan mekanis papan partikel hibrida dari kayu cepat tumbuh dan bambu dengan perlakuan perendaman panas. Jurnal Ilmu Teknologi Kayu Tropis.Vol. 17 No. 1: 47-57.

Mursalin, Tafzi F dan Anggraini D. 2019. Teknologi pembuatan papan partikel dari limbah kulit kelapa muda. Laporan Penelitian. Fakultas Pertanian, Universitas Jambi, Jambi, Indonesia.

Nuryawan, Risnasari dan Sinaga. 2009. Sifat fisis-mekanis papan partikel dari limbah pemanenan kayu. Jurnal Ilmu dan Teknologi Hasil Hutan. 2(2): 57-63.

Samosir TP. 2008. Pengaruh perlakuan pendahuluan pada strand terhadap sifat fisis mekanis oriented strand board campuran tiga jenis kayu cepat tumbuh. Skripsi.Institut Pertanian Bogor, Bogor, Indonesia.

Tsoumis G. 1991. Science and Technology of Wood: Structure, Properties, Utilazation. New York. Van Nostrand Reinhold.