THE EFFECT OF FREQUENCY ON THE ELASTIC PROPERTIES OF MATERIALS

Sri Maiyena; Shahrul Kadri  Ayop; Anis Nazihah Mat  Daud

doi:10.59052/edufisika.v9i2.36578

Penulis

Sri Maiyena Universitas Islam Negeri Mahmud Yunus batusangkar
Shahrul Kadri Ayop Universiti Pendidikan Sultan Idris
Anis Nazihah Mat Daud Universiti Pendidikan Sultan Idris

DOI:

https://doi.org/10.59052/edufisika.v9i2.36578

Kata Kunci:

Elastic Properties, Frequency, Ultrasonic Pulse-Echo Technique

Abstrak

Telah dilakukan penelitian untuk menentukan sifat elastis menggunakan gelombang ultrasonik. Tujuan penelitian adalah untuk melihat pengaruh variasi frekuensi transduser terhadap sifat elastis. Teknik ultrasonic yang digunakan berdasarkan pada teknik pulse echo. Sampel yang digunakan berupa baja, aluminium dan PMMA. Variasi frekuensi transduser yang digunakan yaitu 2,25 Mhz, 5 Mhz dan 10 Mhz. Sifat elastic material yang akan ditentukan yaitu longitudinal modulus, modulus young, shear modulus, bulk modulus dan lame constants. Hasil penelitian menunjukkan bahwa variasi frekuensi transduser tidak mempengaruhi nilai sifat elastis material yang ditentukan. Sifat elastis material berbeda antara material yang satu dengan material yang laiinya tetapi tidak bergantung kepada frekuensi transduser.

Unduhan

Data unduhan belum tersedia.

Referensi

Afifi, H. A. (2003). Ultrasonic pulse echo studies of the physical properties of PMMA, PS, and PVC. Polymer Plastics Technology and Engineering, 42(2), 193–205. https://doi.org/10.1081/PPT-120017922

Bergonzi, L., Vettori, M., & Pirondi, A. (2019). Development of a miniaturized specimen to perform uniaxial tensile tests on high performance materials. Procedia Structural Integrity, 24(2019), 213–224. https://doi.org/10.1016/j.prostr.2020.02.018

Bilici, V. O., & Kaya, E. (2022). Preparation and Characterization of Physico-Mechanical and Structural Properties of Phthalimide Derivative Polymeric Nanocomposites. Thermal Science, 26(4), 3055–3065. https://doi.org/10.2298/TSCI2204055O

Boccaccio, M., Rachiglia, P., Piero, G., Fierro, M., Pucillo, G. P., & Meo, M. (2021). Ultrasonic Imaging.

Braz, G. A., Baggio, A. L., Agnollitto, P. M., Grillo, F. W., Pavan, T. Z., Paula, F. J. A., Nogueira-Barbosa, M. H., Cardoso, G. C., & Carneiro, A. A. O. (2021). Tissue Characterization by Low-Frequency Acoustic Waves Generated by a Single High-Frequency Focused Ultrasound Beam. Ultrasound in Medicine and Biology, 47(2), 334–344. https://doi.org/10.1016/j.ultrasmedbio.2020.09.024

Bucciarelli, F., Malfense Fierro, G. P., Zarrelli, M., & Meo, M. (2019). A Non-Destructive Method for Evaluation of the Out of Plane Elastic Modulus of Porous and Composite Materials. Applied Composite Materials, 26(3), 871–896. https://doi.org/10.1007/s10443-018-9754-5

Carovac, A., Smajlovic, F., & Junuzovic, D. (2011). Application of Ultrasound in Medicine. Acta Informatica Medica, 19(3), 168. https://doi.org/10.5455/aim.2011.19.168-171

Chen, C., Hou, H., Su, M., Wang, S., Jiao, C., & Zhao, Z. (2023). Feasibility of Nonlinear Ultrasonic Method to Characterize the Aging Degree of Polyethylene Pipes. Journal of Materials Engineering and Performance, 32(12), 5514–5522. https://doi.org/10.1007/s11665-022-07496-8

Corradini, A., Cerni, G., D’Alessandro, A., & Ubertini, F. (2017). Improved understanding of grouted mixture fatigue behavior under indirect tensile test configuration. Construction and Building Materials, 155, 910–918. https://doi.org/10.1016/j.conbuildmat.2017.08.048

Dobrzanski, C. D., Gurevich, B., & Gor, G. Y. (2021). Elastic properties of confined fluids from molecular modeling to ultrasonic experiments on porous solids. Applied Physics Reviews, 8(2). https://doi.org/10.1063/5.0024114

Dorciak, F., Vasko, M., Handrik, M., Barnik, F., & Majko, J. (2019). Tensile test for specimen with different size and shape of inner structures created by 3D printing. Transportation Research Procedia, 40, 671–677. https://doi.org/10.1016/j.trpro.2019.07.095

EL-Wazery, M. S., EL-Elamy, M. I., & Zoalfakar, S. H. (2017). Mechanical properties of glass fiber reinforced polyester composites. International Journal of Applied Science and Engineering, 14(3), 121–131. https://doi.org/10.6703/IJASE.2017.14(3).121

Erol, A., Bilici, V. Ö., & Yönetken, A. (2022). Characterization of the elastic modulus of ceramic-metal composites with physical and mechanical properties by ultrasonic technique. Open Chemistry, 20, 593–601. https://doi.org/10.1515/chem-2022-0180

Fathoni, M. H., Pirngadi, H., & Rivai, M. (2013). Perancangan, pembuatan dan karakterisasi tranduser ultrasonik 3,5 MHz untuk pengujian bahan padat. J Teknik Pomits, 2(2), 306–311.

Fischer-Cripps, A. C. (2004). Materials data. The Physics Companion. https://doi.org/10.1887/0750309539/b1258b1

Franco, E. E., Meza, J. M., & Buiochi, F. (2011). Measurement of elastic properties of materials by the ultrasonic through-transmission technique medición de las propiedades elásticas de materiales por el método de transmisión ultrasónica. Dyna, 78(168), 59–64.

Fu, Z. F., Yang, Z. Y., Cheng, Q., Chen, H. P., Wang, B., & Zhou, J. P. (2021). First-principles investigation of the structural, elastic, anisotropic and electronic properties of Pmma-carbon. Molecular Physics, 119(3). https://doi.org/10.1080/00268976.2020.1809729

Greenwood, C., Clement, J. G., Dicken, A. J., Evans, J. P. O., Lyburn, I. D., Martin, R. M., Rogers, K. D., Stone, N., Adams, G., & Zioupos, P. (2015). The micro-architecture of human cancellous bone from fracture neck of femur patients in relation to the structural integrity and fracture toughness of the tissue. Bone Reports, 3, 67–75. https://doi.org/10.1016/j.bonr.2015.10.001

Halimah, M. K., & Eevon, C. (2019). Comprehensive study on the effect of Gd 2 O 3 NPs on elastic properties of zinc borotellurite glass system using non-destructive ultrasonic technique. Journal of Non-Crystalline Solids, 511(January), 10–18. https://doi.org/10.1016/j.jnoncrysol.2019.01.033

Hossack, M., Fisher, R., Torella, F., Madine, J., Field, M., & Akhtar, R. (2022). Micromechanical and Ultrastructural Properties of Abdominal Aortic Aneurysms. Artery Research, 28(1), 15–30. https://doi.org/10.1007/s44200-022-00011-3

Ivanchev, I. (2022). Experimental determination of dynamic modulus of elasticity of concrete with ultrasonic pulse velocity method and ultrasonic pulse echo method. IOP Conference Series: Materials Science and Engineering, 1252(1), 012018. https://doi.org/10.1088/1757-899x/1252/1/012018

Jakovljevic, M., Hsieh, S., Ali, R., Chau, G., Kung, L., Hyun, D., Dahl, J. J., Jakovljevic, M., Hsieh, S., Ali, R., Chau, G., Kung, L., Hyun, D., & Dahl, J. J. (2018). approach Local speed of sound estimation in tissue using pulse-echo ultrasound: Model-based approach. Acoustical Society of America, 144(Jully). https://doi.org/10.1121/1.5043402

Jie, G., Yan, L., Mingfang, Z., Mingkun, L., Hongye, L., Bin, W., & Cunfu, H. (2021). Guided waves propagation in multi-layered porous materials by the global matrix method and Biot theory. Applied Acoustics, 184, 108356. https://doi.org/10.1016/j.apacoust.2021.108356

Jordan, J. L., Rowland, R. L., Greenhall, J., Moss, E. K., Huber, R. C., Willis, E. C., Hrubiak, R., Kenney-Benson, C., Bartram, B., & Sturtevant, B. T. (2021). Elastic properties of polyethylene from high pressure sound speed measurements. Polymer, 212, 123164. https://doi.org/10.1016/j.polymer.2020.123164

Judawisastra, H., Claudia, Sasmita, F., & Agung, T. P. (2019a). Elastic Modulus Determination of Thermoplastic Polymers with Pulse-Echo Method Ultrasonic Testing. IOP Conference Series: Materials Science and Engineering, 547, 012047. https://doi.org/10.1088/1757-899X/547/1/012047

Judawisastra, H., Claudia, Sasmita, F., & Agung, T. P. (2019b). Study of Elastic Modulus Determination of Polymenrs with Ultrasonic Method. International Journal on Advanced Science Engieering Information Technology, 547(3), 874–879. https://doi.org/10.1088/1757-899X/547/1/012047

Khatib, N., Ouacha, E. H., Faiz, B., Ezzaidi, M., & Banouni, H. (2019). Analysis of the attenuative behaviour of accelerated cement based materials through a series of ultrasound pulse echo measurements. Engineering Solid Mechanics, 7(2), 109–120. https://doi.org/10.5267/j.esm.2019.4.002

Lopez, A., Bacelar, R., Pires, I., Santos, T. G., Sousa, J. P., & Quintino, L. (2018). Non-destructive testing application of radiography and ultrasound for wire and arc additive manufacturing. Additive Manufacturing, 21, 298–306. https://doi.org/10.1016/j.addma.2018.03.020

Messineo, M. G., Rus, G., Eliçabe, G. E., & Frontini, G. L. (2016). Layered material characterization using ultrasonic transmission. An inverse estimation methodology. Ultrasonics, 65, 315–328. https://doi.org/10.1016/j.ultras.2015.09.010

Mishra, R. R., & Sharma, A. K. (2016). On mechanism of in-situ microwave casting of aluminium alloy 7039 and cast microstructure. JMADE. https://doi.org/10.1016/j.matdes.2016.09.041

Nsengiyumva, W., Zhong, S., Lin, J., Zhang, Q., Zhong, J., & Huang, Y. (2021). Advances, limitations and prospects of nondestructive testing and evaluation of thick composites and sandwich structures: A state-of-the-art review. Composite Structures, 256, 112951. https://doi.org/10.1016/j.compstruct.2020.112951

Oglat, A. A., Matjafri, M. Z., Suardi, N., Oqlat, M. A., Abdelrahman, M. A., Oqlat, A. A., & Abdalrheem, R. (2018). Measuring the Acoustical Properties of Fluids and Solid Materials Via Dealing with A-SCAN (GAMPT) Ultrasonic. Journal of Physics: Conference Series, 1083(1). https://doi.org/10.1088/1742-6596/1083/1/012053

Pabst, W., & Gregorová, E. (2014). Young’s modulus of isotropic porous materials with spheroidal pores. Journal of the European Ceramic Society, 34(13), 3195–3207. https://doi.org/10.1016/j.jeurceramsoc.2014.04.009

Phani, K. K. (2008). A novel method of predicting ultrasonic and elastic properties of isotropic ceramic materials after sintering from the properties of partially sintered or green compacts. Journal of the American Ceramic Society, 91(1), 215–222. https://doi.org/10.1111/j.1551-2916.2007.02146.x

Phillips, C., Kortschot, M., & Azhari, F. (2022). Towards standardizing the preparation of test specimens made with material extrusion: Review of current techniques for tensile testing. Additive Manufacturing, 58(July), 103050. https://doi.org/10.1016/j.addma.2022.103050

Puchi-Cabrera, E. S., Staia, M. H., & Iost, A. (2015). A description of the composite elastic modulus of multilayer coated systems. Thin Solid Films, 583, 177–193. https://doi.org/10.1016/j.tsf.2015.02.078

Qodir, F., & Putra, J. A. (2016). Tranduser Ultrasonik Sebagai Pendeteksi Gerak Pada Sistem Keamanan Rumah. Semesta Teknika, 8(1), 61–71. https://doi.org/10.18196/st.v8i1.913

Rajzer, I., Piekarczyk, W., & Castaño, O. (2016). An ultrasonic through-transmission technique for monitoring the setting of injectable calcium phosphate cement. Materials Science and Engineering C, 67, 20–25. https://doi.org/10.1016/j.msec.2016.04.083

Rose, J. L. (2014). Ultrasonic guided waves in solid media. Ultrasonic Guided Waves in Solid Media, 9781107048, 1–512. https://doi.org/10.1017/CBO9781107273610

Sanabria, S. J., Martini, K., Freystätter, G., Ruby, L., Goksel, O., Frauenfelder, T., & Rominger, M. B. (2019). Speed of sound ultrasound: a pilot study on a novel technique to identify sarcopenia in seniors. European Radiology, 29(1), 3–12. https://doi.org/10.1007/s00330-018-5742-2

Sigrist, R. M. S., Liau, J., Kaffas, A. El, Chammas, M. C., & Willmann, J. K. (2017). Ultrasound elastography: Review of techniques and clinical applications. Theranostics, 7(5), 1303–1329. https://doi.org/10.7150/thno.18650

Souri, D. (2017). Ultrasonic velocities, elastic modulus and hardness of ternary Sb-V2O5-TeO2 glasses. Journal of Non-Crystalline Solids, 470(April), 112–121. https://doi.org/10.1016/j.jnoncrysol.2017.05.006

Thi, T., & Hoa, K. (2017). Determination Of Acoustic Properties Of PMMA Using Ultrasonic Through-Transmission Technique. Journal of Science and Technology, 4(11), 16–19.

Tomar, S., & Khurana, A. (2011). Transmission of longitudinal wave through micro-porous elastic solid interface. International Journal of Engineering, Science and Technology, 3(2). https://doi.org/10.4314/ijest.v3i2.68128

Trzepiecinski, T., Najm, S. M., Sbayti, M., Belhadjsalah, H., Szpunar, M., & Lemu, H. G. (2021). New advances and future possibilities in forming technology of hybrid metal–polymer composites used in aerospace applications. Journal of Composites Science, 5(8). https://doi.org/10.3390/jcs5080217

Tsuji, K., Norisuye, T., Nakanishi, H., & Tran-Cong-Miyata, Q. (2019). Simultaneous measurements of ultrasound attenuation, phase velocity, thickness, and density spectra of polymeric sheets. Ultrasonics, 99(July), 105974. https://doi.org/10.1016/j.ultras.2019.105974

Umiatin, U., Oktaviana, T., Wijaya, E., Riandini, R., & Yusuf, F. (2021). the Bone Microstructure Identification Model Based on Backscatter Mode of Ultrasound. Spektra: Jurnal Fisika Dan Aplikasinya, 6(1), 61–70. https://doi.org/10.21009/spektra.061.07

Wang, X. F., Han, R., Han, T. L., Han, N. X., & Xing, F. (2018). Determination of elastic properties of urea-formaldehyde microcapsules through nanoindentation based on the contact model and the shell deformation theory. Materials Chemistry and Physics, 215(February), 346–354. https://doi.org/10.1016/j.matchemphys.2018.05.041

Wells, P. N. T., & Liang, H. D. (2011). Medical ultrasound: Imaging of soft tissue strain and elasticity. Journal of the Royal Society Interface, 8(64), 1521–1549. https://doi.org/10.1098/rsif.2011.0054

Workman, G. L., & Kishoni, D. (2007). Nondestructive Testing Handbook (Third). American Society for Nondestructive Testing.

Wu, S. J., Chin, P. C., & Liu, H. (2019). Measurement of elastic properties of brittle materials by ultrasonic and indentation methods. Applied Sciences (Switzerland), 9(10). https://doi.org/10.3390/app9102067

Zhang, J., & Malzbender, J. (2015). Mechanical characterization of micro- and nano-porous alumina. Ceramics International, 1–5. https://doi.org/10.1016/j.ceramint.2015.05.007

Zheng, S., Zhang, S., Luo, Y., Xu, B., & Hao, W. (2021). Nondestructive analysis of debonding in composite/rubber/rubber structure using ultrasonic pulse-echo method. Nondestructive Testing and Evaluation, 36(5), 515–527. https://doi.org/10.1080/10589759.2020.1825707

Zou, Z., Hao, Y., Tian, F., Zheng, Y., He, W., Yang, L., & Li, L. (2020). An ultrasonic longitudinal through transmission method to measure the compressive internal stress in epoxy composite specimens of gas-insulated metal enclosed switchgear. Energies, 13(5). https://doi.org/10.3390/en13051248